Tyre bead is the term for the edge of a tyre that sits on the wheel. Wheels for automobiles, bicycles, etc. are made with a small slot or groove into which the tire bead sits. When the tyre is properly inflated, the air pressure within the tyre keeps the bead in this groove. It is common amongst drivers of off-road vehicles to decrease the air pressure in their tyres. This makes the tread of the tyre spread out, creating more surface area for the tyre’s tread to grip the terrain. If the pressure is too low, there may not be enough pressure to keep the bead on the wheel, thus causing the bead to pop off the wheel; this is often referred to as “losing a bead”. Beadlocks, which clamp the bead on the wheel, are often used in this case.
Properties of Tyre bead wire :
| Diameter | Breaking Load | Elongation At Break | Torsion | No of Bends | Coat Weight |
| (mm) | (Kg) | Minimum | Minimum | (Gm/Kg) | |
| 0.89 ± 0.02 | 125 min | 5.00 % min | 58 | 10 | 0.30 – 0.65 |
| 0.93 ± 0.02 | 130 min | 5.00 % min | 58 | 10 | 0.30 – 0.65 |
| 0.965 ± 0.02 | 135 min | 5.00 % min | 58 | 10 | 0.30 – 0.65 |
| 1.10 ± 0.02 | 178 min | 5.00 % min | 58 | 10 | 0.15 – 0.45 |
| 1.30 ± 0.02 | 235 min | 5.00 % min | 58 | 10 | 0.15 – 0.45 |
| 1.60 ± 0.02 | 426 min | 5.00 % min | 58 | 10 | 0.15 – 0.45 |
| 1.83 ± 0.02 | 557 min | 5.00 % min | 58 | 10 | 0.15 – 0.45 |
**Above sizes are our standard sizes. We can customize as per customer’s requirement
Dimensions of Packaging :
| Size | Type of Packing | |
| Z2 Cheese Coil | Bobbin | |
|
0.89 – 1.83 mm | ID – 380 mm OD – 750 mm Width – 285 – 300mm | OD – 760 mm Barrel Dia – 400 mm Bore Dia – 33 mm Inner Width – 305 mm Outer Width – 349mm |
| Pallet Base – 760 mm × 760 mm Pallet Height – 690 mm | PalletBase – 760 mm ×760 mm Pallet height – 880 mm Spool Weight – 73 Kg | |
