- May 27, 2019
- Posted by: admin
- Category:
No Comments
Magnesium is the primary constituent in this alloy. AA is moderate strength, non-heat treatable alloy that combines its Strength with excellent Formability & Corrosion Resistance. Aluminum’s unique combination of properties makes it a highly versatile material when alloyed with various metals. Besides light weight characteristics and corrosion resistance property it’s excellent workability make it a natural choice for industrial use.
AA wires are used in many products by the leaders of the industry as raw material.
Specifications:
| Diameter | 0.12 mm – 6.00 mm” |
| Type (Modulus) | Single Filar, Bifilar, Tri Filar, Tetra Filar (Quadri Filar) |
| Applications |
|
| GRADE | SI % (max) | FE % (max) | CU % (max) | MN % | MG % | CR. % | ZN % (max) | TI % | Other (max) | Aluminium |
| 5019 | 0.40 | 0.50 | 0.10 | 0.10 – 0.60 | 4.50 – 5.60 | 0.20 (MAX) | 0.20 | 0.20 (MAX) | 0.15 | Balance |
| 5050 | 0.40 | 0.70 | 0.20 | 0.10 (MAX) | 1.1- 1.8 | 0.10 (MAX) | 0.25 | – | 0.15 | Balance |
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 (MAX) | 2.2- 2.8 | 0.15 – 0.35 | – | – | 0.15 | Balance |
| 5056 | 0.30 | 0.40 | 0.10 | 0.05 -0.20 | 4.50 – 5.60 | 0.05 -0.20 | 0.10 | – | 0.15 | Balance |
| 5154 | 0.45 | 0.45 | 0.10 | 0.80 – 1.30 | 2.80 – 3.50 | – | 0.20 | 0.20 (MAX) | – | Balance |
| 5356 | 0.25 | 0.40 | 0.10 | 0.05 -0.20 | 4.50 -5.50 | 0.050 – 0.20 | 0.10 | 0.06 – 0.20 | 0.15 | Balance |
| 5754 | 0.40 | 0.40 | 0.10 | 0.50 (MAX) | 0.26 – 36 | 0.30 (MAX) | 0.20 | 0.15 (MAX) | 0.15 | Balance |
| 6101 | 0.3 – 0.7 | 0.5 | 0.10 | 0.03 (MAX) | 0.35 -0.38 | 0.03 (MAX) | 0.10 | – | 0.15 | Balance |
| 6201 | 0.60 | 0.22 | 0.007 | – | 0.63 (MAX) | 0.004 (MAX) | 0.008 | NI 0.003 (MAX) | PB 0.007 | Balance |
| Normal Diameter Ω/mm | Diameter difference ±mm | Resistivity (20°C) < 0km/mm2 | Measured (20°C) < 0/km | Density (20°C) g/cm3 | Conductivity (20°C) ≥ | intensity test of the Soft state >N | Tensile Strength of Soft-State >N mm2 | Soft-state elongsion >N | Bard Intensity >N | Tensile Strength hard state >N mm2 | Part enlongsion >N mm2 |
| 0.1 | 0.003 | 48 | 6111 | 2.78 | 36 | 1.6 | 210 | 8 | 2.6 | 340 | 1 |
| 0.11 | 0.003 | 48 | 5050 | 2.78 | 36 | 1.9 | 210 | 8 | 3.2 | 340 | 1 |
| 0.12 | 0.003 | 48 | 4244 | 2.78 | 36 | 2.3 | 210 | 8 | 3.8 | 340 | 1 |
| 0.13 | 0.003 | 48 | 3616 | 2.78 | 36 | 2.7 | 210 | 8 | 4.5 | 340 | 1 |
| 0.14 | 0.003 | 48 | 3118 | 2.78 | 36 | 3.2 | 210 | 8 | 5.23 | 340 | 1 |
| 0.15 | 0.003 | 48 | 2716 | 2.78 | 36 | 3.7 | 210 | 10 | 6 | 340 | 1 |
| 0.16 | 0.003 | 48 | 2387 | 2.78 | 36 | 4.2 | 210 | 10 | 6.8 | 340 | 1 |
| 0.17 | 0.003 | 48 | 2114 | 2.78 | 36 | 4.7 | 210 | 10 | 7.7 | 340 | 1 |
| 0.18 | 0.003 | 48 | 1886 | 2.78 | 36 | 5.3 | 210 | 10 | 8.6 | 340 | 1 |
| 0.19 | 0.003 | 48 | 1692 | 2.78 | 36 | 5.9 | 210 | 10 | 9.6 | 340 | 1 |
| 0.2 | 0.004 | 48 | 1527 | 2.78 | 36 | 6.5 | 210 | 10 | 10 | 340 | 1 |
| 0.25 | 0.004 | 48 | 977 | 2.78 | 36 | 10 | 210 | 12 | 16 | 340 | 1 |
| 0.3 | 0.004 | 48 | 679 | 2.78 | 36 | 14 | 210 | 12 | 24 | 340 | 1 |
| 0.35 | 0.004 | 48 | 498 | 2.78 | 36 | 20 | 210 | 12 | 32 | 340 | 1 |
| 0.4 | 0.005 | 48 | 381 | 2.78 | 36 | 26 | 210 | 12 | 42 | 340 | 1 |
| 0.45 | 0.005 | 48 | 301 | 2.78 | 36 | 33 | 210 | 12 | 54 | 340 | 1 |
| 0.5 | 0.005 | 48 | 244 | 2.78 | 36 | 41 | 210 | 12 | 66 | 340 | 1 |
| 0.64 | 0.006 | 48 | 149 | 2.78 | 36 | 67 | 210 | 12 | 109 | 340 | 1 |
| 0.7 | 0.007 | 48 | 124 | 2.78 | 36 | 80 | 210 | 12 | 130 | 340 | 1 |
| 0.81 | 0.008 | 48 | 93.1 | 2.78 | 36 | 108 | 210 | 12 | 175 | 340 | 1 |
| 0.9 | 0.009 | 48 | 75.4 | 2.78 | 36 | 133 | 210 | 12 | 216 | 340 | 1 |
| 1.02 | 0.01 | 48 | 58.7 | 2.78 | 36 | 171 | 210 | 12 | 277 | 340 | 1 |
| 1.13 | 0.011 | 48 | 47.8 | 2.78 | 36 | 210 | 210 | 12 | 340 | 340 | 1 |
| 1.38 | 0.013 | 48 | 32 | 2.78 | 36 | 314 | 210 | 12 | 508 | 340 | 1 |
| 1.63 | 0.016 | 48 | 23 | 2.78 | 36 | 438 | 210 | 12 | 709 | 340 | 1 |
| 1.78 | 0.017 | 48 | 19.2 | 2.78 | 36 | 522 | 210 | 12 | 846 | 340 | 1 |
| 1.96 | 0.019 | 48 | 15.9 | 2.78 | 36 | 633 | 210 | 12 | 1025 | 340 | 1 |
